SpecWriter

  1. SupplierStramit
  2. Product CategorySteel Walling
  3. ProductStramit AvantaLine™
  4. Rib Height25mm
  5. Cover Width300mm
  6. MaterialZINCALUME® steel
  7. Material SpecificationAM125 / 0.55 BMT / G300
  8. ColourZINCALUME® steel

STEEL SELECT® Product Specification

Back
Stramit AvantaLine™ architectural wall cladding - steel select render
Name:
Stramit AvantaLine™
Supplier:
Stramit
Rib Height
25mm
Cover Width:
300mm
Material:
ZINCALUME® steel
Thickness (BMT):
0.55 BMT
Colour/Finish:
ZINCALUME® steel

Steel Walling: Stramit AvantaLine™
Rib height: 25mm
Cover width: 300mm
Supplier: Stramit (stramit.com.au)
Material: ZINCALUME® steel Conforming to AS/NZS 1365:1996 (R2016) and AS 1397:2021
Colour: ZINCALUME® steel. Please confirm with Stramit regarding colour range availability.
Thickness: 0.55 BMT
Grade: G300
Metallic Coating: AM125

The walling shall be 0.55mm BMT Stramit AvantaLine™ cladding in continuous lengths with 25mm high ribs and flat tops spaced at specified centres to suit fixing methods. Sheeting material shall be protected steel sheet to Australian Standard AS1397, with a minimum yield stress of 300MPa (Grade G300) and an AM100/AZ150 coating with an oven-baked paint film of selected colour, or a plain AM125/AZ150 coating.

Installation:
The sheeting shall be fixed to the girts/battens in accordance with the manufacturer’s recommendations. Suitable fixing screws in accordance with Australian Standard AS3566, Class 3, shall be used at every support. Sheets shall be laid in such a manner that the approved side lap faces away from the prevailing weather.
Flashings shall be supplied in compatible materials as specified; minimum cover of flashing shall be 150mm.
All sheeting shall be fixed in a workman-like manner, leaving the job clean and weathertight. All debris (nuts, screws, cuttings, filings etc.) shall be cleaned off daily.

Documents: Refer Stramit AvantaLine™ Wall Cladding Product Technical Manual
Warranties: Refer to Stramit and warranties.bluescopesteel.com.au

Create new specification

Specification copied!

Paste it into your formal documentation as required.

  • The colours/finishes shown represent actual product colours/finishes as accurately as possible. However, we recommend checking your chosen colour/finish against an actual sample of the product, as varying light conditions, screens and devices may affect colour tones and finishes.
  • We recommend contacting your preferred supplier to confirm colour/finish availability for your selected product and the most suitable material for your project.